Oerlikon to present sustainable plant solutions for MMF industry at ITME

Oerlikon to present sustainable plant solutions for MMF industry at ITME

Shares

For Oerlikon, this will be the third major appearance in the region in the fourth quarter of this year, after having had in November two exciting and interesting customer events in Daman, India, and Dhaka, Bangladesh.

The Swiss Oerlikon Group’s Polymer Processing Solutions division will be presenting itself at the ITME 2022 under the banner of ‘From Melt to Yarn, Fibres and Nonwovens’. The international trade fair is taking place in the India Exposition Mart, Noida, close to New Delhi, India. Between December 8 and 13 this year, more than 1800 exhibitors and over 150.000 visitors are expected. Oerlikon will be presenting a broad range of products and services focused on manufacturing and processing manmade fibres. Oerlikon’s team of experts is very much looking forward to seeing visitors at booth C15 in Hall 11. 

In addition to various new component exhibits from the fields of continuous polycondensation including gear metering pumps, filament (POY, FDY, IDY, BCF) and staple fibre spinning, texturing as well as nonwovens production, the dialogue with all customers will now more than ever after almost 6 years without an ITME in India be again at the center of the trade show activities.

Extrusion plant solutions: Mechanical produced melt for manmade fibres.

For Oerlikon, this will be the third major appearance in the region in the fourth quarter of this year, after having had in November two exciting and interesting customer events in Daman, India, and Dhaka, Bangladesh. This is also because the important markets of India and Bangladesh are currently still standing out in terms of their investment behaviour and currently offer good opportunities for further polymer processing projects. More than 250 participants discussed the technology and market analysis presentations held by Oerlikon experts, at the Oerlikon Technology Symposium in Daman, India. Afterwards, all guests celebrated the 100th anniversary of Oerlikon Barmag and the 75th independence of India with a big gala event.

Customer events in Daman, India, and Dhaka, Bangladesh.

India right now continues to have above-average economic growth with a 6.8 per cent Gross Domestic Product (GDP) for 2022. Experts speak of “a bright spot in a global gloom.” Some facts and figures:

  • The textile industry in India is one of the largest in the world with a large raw material base and manufacturing strength across the value chain.
  • India is the 2nd largest producer of MMF fibre. India is the 6th largest exporter of textiles and apparel in the world.
  • India became the second-largest manufacturer of Personal Protective Equipment (PPE) kits in the world. 
  • India is the 6th largest producer of technical textiles with a 6 per cent global share (12 per cent CAGR), the largest producer of cotton and jute in the world.
  • The industry contributes to 7 per cent of industrial output in value terms, 2 per cent of India’s GDP and 12 per cent of the country’s export earnings.
  • The share of textile, apparel and handicrafts in India’s total exports was 10.62 per cent in 2021-22.
  • The textile industry in India is one of the largest economic sectors that contributes the most to job creation in the country.  It engages 16.73 lakhs of people consisting of 10.28 per cent of the total employment share.
  • The domestic apparel and textile industry in India contributes 2.3 per cent to the country’s GDP, 7 per cent of industry output in value terms.
  • The domestic textiles and apparel industry stood at $ 152 billion in 2021.

“Major growth of textiles will come from Manmade Fiber industry”, said Piyush Goyal, Union Minister of Textiles, Consumer Affairs, Food & Public Distribution and Commerce & Industry at the end of October in India. He suggested that the industry should understand each other and work in synergy to amicably resolve the issues among the producers and users of polyester in the entire value chain. Industry representatives responded that they are hopeful of achieving the export of $ 100 billion in the next 5 to 6 years.

Oerlikon round table discussion in Daman, India

Success in the markets
In India, however, things continue to go very well for Oerlikon in other respects. In the middle of the year, the joint venture Oerlikon Barmag Huitong (Yangzhou) Engineering Company also recorded a major success. Oerlikon was able to commission a 300 tonne per day film-grade continuous polycondensation plant at the Indian customer Sumilon.

Sumilon Industries started in 1970, with trading activity and first manufacturing in 1977. Currently the largest manufacturer and exporter of metallic yarn and one of the leading manufacturers of BOPET film, metalised film, and lacquered film. Sumilon has always been committed to the goal that quality is everything, creating new technologies and enabling safer materials for all.

In fact, the COVID-19 pandemic has also had a serious impact on the project, such as project site installation, commissioning, start-up and so on. But the teams of Oerlikon and Sumilon worked closely together, constantly exploring new train of thought, entirely guiding on-site installation and commissioning, remotely controlling DCS system to run, and using modern means of hardware and software, the one-off start-up of 300T/D CP plant has been smoothly achieved, and the device is now stable in operation.

Growing with the second largest exporter of textiles
Bangladesh still has huge potential, especially for the manmade fibre industry. In the so-called downstream (weaving, knitting, finishing, etc.), the country is already very advanced, but what is missing is its own raw material production (MEG, PTA) and its processing in a continuous polycondensation plant, as supplied by Oerlikon. With Modern Syntex, however, the first “From Melt to Yarn and Fibres” plant is currently being built in Chittagong, Bangladesh, under our leadership. Some facts and figures:

  • With more than 164 million inhabitants, Bangladesh is the eighth largest country in the world in terms of population. This makes it one of the most densely populated countries in the world. 
  • The economy of the up-and-coming country continues to grow rapidly, even during the Covid-19 pandemic, and the poverty rate has been halved since 2000. By 2026, Bangladesh will have officially left the status of a Least Developed Country (LDC), and by 2041, the country aims to become a high-income industrialized country (HIC).
  • Bangladesh’s economic success is primarily based on its textile industry, which accounts for 10 per cent of the gross national product and 80 per cent of the export earnings.
  • Bangladesh is the world’s second largest exporter of textiles. 

With a colourful and informative event, held in the capital Dhaka, more than 200 invited guests celebrated the 100th anniversary of Oerlikon Barmag and the 50th anniversary of independence and liberty of Bangladesh. The Mayor of Dhaka, Md Atiqul Islam, emphasised the importance of the textile industry for his country and held out the prospect of further investments, especially in the field of manmade fibre production.

About Oerlikon
Oerlikon is a global innovation powerhouse for surface engineering, polymer processing and additive manufacturing. The Group’s solutions and comprehensive services, together with its advanced materials, improve and maximise the performance, function, design and sustainability of its customers’ products and manufacturing processes in key industries. Pioneering technology for decades, everything Oerlikon invents and does is guided by its passion to support customers’ goals and foster a sustainable world. Headquartered in Pfäffikon, Switzerland, the Group operates its business in two Divisions – Surface Solutions and Polymer Processing Solutions. It has a global footprint of more than 12 000 employees at 202 locations in 37 countries and generated sales of CHF 2.65 billion in 2021.

About the Oerlikon Polymer Processing Solutions division

With its Oerlikon Barmag, Oerlikon Neumag, Oerlikon Nonwoven and Oerlikon HRSflow brands, the Oerlikon Polymer Processing division focuses on manmade fibers plant engineering and flow control equipment solutions. Oerlikon is one of the leading providers of manmade fibre filament spinning systems, texturing machines, BCF systems, staple fibre systems and solutions for the production of nonwovens and – as a service provider – offers engineering solutions for the entire textile value added chain. Furthermore, Oerlikon offers a range of a high-precision flow control solutions. This currently includes a large selection of gear metering pumps for the textile and other sectors such as automobile construction, the chemical industry and the dyes and lacquers industry. With Oerlikon HRSflow, the division develops innovative hot runner systems for the polymer processing industry. In collaboration with Oerlikon Balzers, it offers highly-efficient, effective coating solutions from a single source.

Gear metering pumps: The perfect choice for all applications

As a future-oriented company, the research and development at this division of the Oerlikon Group is driven by energy efficiency and sustainable technologies (e-save). With its range of polycondensation and extrusion systems and their key components, the company caters to the entire manufacturing process – from the monomer all the way through to the textured yarn and other innovative polymer materials and applications. The product portfolio is rounded off with automation and Industry 4.0 solutions.

The primary markets for the product portfolio of Oerlikon Barmag are in Asia, especially in China, India and Turkey, and – for those of Oerlikon Neumag and Oerlikon Nonwoven – in the USA, Asia, Turkey and Europe. Oerlikon HRSflow is, above all, active in the key automotive markets. These include Germany, China, Korea and Brazil. Worldwide, the division – with more than 4,500 employees – has a presence in 120 countries with production, sales and distribution and service organizations. At the research and development centers in Remscheid, Neumünster (both Germany), San Polo di Piave / Treviso (Italy) and Suzhou (China), highly-qualified engineers, technologists and technicians develop innovative and technologically-leading products for tomorrow’s world. 

CATEGORIES
TAGS