Truetzschler to launch autoleveller draw frame
ITMA ASIA marks the launch of the new Draw Frame TD 10. It features increased compactness and has a highly modern regulating system.
ITMA ASIA marks the launch of the new Draw Frame TD 10. It features increased compactness and has a highly modern regulating system. This results in a significant increase in control dynamics and an improvement in sliver quality. Despite 20 per cent less space requirement, it was possible to increase the filter once more. The intelligent SMART CREEL in combination with T-LED offers an unprecedented level of functional reliability and more comfort for the operator and mill manager. Digitalisation and connectivity are not only catchwords at Truetzschler: Machines connected to T-Data allow a real-time quality monitoring.
TC 15: Benchmark in productivity
A whole range of individual measures ensure performance increases compared to the predecessor machine. In addition to high productivity, the 1.28 m wide Card TC 15 stands for increased sliver evenness and improved running behaviour. Truetzschler will demonstrate the high flexibility with five different sliver coiling systems on the stand.
TC 0: The most successful card in China
Made in China – for China. The Card TC 10 is the card for the Chinese market. This Truetzschler card in the traditional working width of one metre has been specifically designed for the Chinese market.
T-MOVE: Space saving & increased efficiency
The can filling station does more than just save space. The new moving head allows a can change at high delivery speeds. This improves card efficiency. T-MOVE is also designed for JUMBO CANS with 1,200 mm diameter.
T-SCAN
In the Foreign Part Separator T-SCAN TS-T5, five detection technologies ensure an all-time high separation efficiency:
IDF-Vortex
In cooperation with the Japanese company Murata, the leading manufacturer of airjet spinning machines, Truetzschler has developed a new sliver preparation technology. When processing viscose, two of three draw frame passages can be eliminated. This represents an enormous economic advantage.
T-WIND
Robust master roll winders are used when the production of ready-for-sale rolls is decoupled from the nonwovens production. The two-stage configuration with downstream unwinding, slitting and winding increases process stability. The Surface Winder TWW-SD provides an appropriate solution for spunlace systems, for a variety of thermal bonding processes as well as for technical nonwovens. Winding of master rolls up to 1,800 mm diameter and system speeds up to 300 m/min can be realised.
GX1
The new GX1 clothing has been specifically developed for all spinning processes in the area of cotton. Improved fibre guidance results in less short fibre content and significantly better nep separation. The clothing is basically maintenance-free, but can also be ground when required.
NOVOTOP 30
The flat clothing NOVOTOP 30 has been newly developed for the processing of coarse and/or dyed fibres and reclaimed fibres for rotor spinning. It is ideally suited for use with yarn counts below Ne 10 and realises high production speeds. The flat type NT 30 is available as MAGNOTOP and CLASSICTOP.
With about 3,000 employees, Truetzschler is one of the world’s leading textile machinery manufacturers. The family business with its headquarter in Germany is divided into the business units Spinning, Nonwovens & Man-Made Fibers and Card Clothing. Machines, installations and accessories for spinning preparation, the nonwovens and man-made fibre industry are produced in eight locations worldwide. In addition to four factories in Germany, Truetzschler has production sites in China (Shanghai), India (Ahmedabad), USA (Charlotte) and Brazil as well as a development location in Switzerland. Service centres in Bangladesh, Vietnam, Indonesia and Pakistan provide customer proximity in the important textile processing areas.
