Svegea to exhibit EC 300 machine for garment makers at Texprocess 2022

Svegea to exhibit EC 300 machine for garment makers at Texprocess 2022

The EC 300 Svegea has an output of around 20,000 metres per hour.


Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24 – the 70th anniversary of its automatic collarette cutter.

On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Håkan Steene, Managing Director, Svegea. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2

With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.

The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

“A key function is the ability to ensure perfect synchronization of the tubular fabric between the machine’s turntable platform and its  upper cutting body,” Steene explains. “We supply a wide range of automatic collarette band cutting machines with capacities to match the needs of our customers.”

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications

Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

Occupying a unique niche are the company’s customer-specific bias cutting and winding units. On these machines, circular woven materials are fed to the cutter via a revolving winder and slit at angles, so that both the warp and weft of the weave are skewed at specified angles rather than just in the vertical and horizontal directions, as is usual.

This allows the slit fabrics to drape and form much more easily to the complex shapes of technical textile components such as, for example, circular rubber hoses and special diaphragms and seals which are employed in the aerospace and automotive industries, and for which the special fabrics act as critical reinforcements.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

“Our latest bias cutting and winding units are being equipped with new features such as edge alignment and electronic roll tension control,” says Steene. “We will be happy to discuss its unique capabilities with interested parties in Frankfurt.”

 “Svegea is a unique company with some ingenious solutions for both garment manufacturers and companies making specialised technical products,” says Therese Premler-Andersson, Secretary General, TMAS. “Messe Frankfurt’s decision to hold Texprocess, Techtextil and the Heimtextil Summer Special together this June will allow our members to showcase the full breadth of their portfolios, extending to all areas of the textile supply chain.”

Svegea will be one of a number of TMAS companies exhibiting at stand F41 in Hall 8 at Texprocess. In addition, Coloreel is jointly exhibiting with embroidery machine maker Tajima at stand H44 in Hall 8. ACG Kinna will be at stand E27 in Hall 3 as part of the Heimtextil show and Eltex will be at Techtextil in Hall 12, at stand E19.

Share This

Hi There!

Now get regular updates from ITJ Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Textile News on Whatsapp! Enjoy

+91 81082 88300

Reach out to us

Call us at +91 8108603000 or

Schedule a Call Back