Van de Wiele Extrusion delivers first BCF Extrusion line to Turkey
In September 2014, Van de Wiele extrusion successfully signed a contract with a Turkish customer to deliver a BCF extrusion line. The line is a mono colour line able to produce polypropylene, polyamide 6 and polyester BCF yarns. The mono colour line is delivered in March 2015. Other orders have been accepted and will be delivered in the near future.
In September 2014, Van de Wiele extrusion successfully signed a contract with a Turkish customer to deliver a BCF extrusion line. The line is a mono colour line able to produce polypropylene, polyamide 6 and polyester BCF yarns. The mono colour line is delivered in March 2015. Other orders have been accepted and will be delivered in the near future.
Technical specifications:
The Van de Wiele BCF extrusion lines are based on a 3-end system with following specifications:
Multi- or single polymer executions
- Modular system(s) starting from 1 extruder with 2 positions = 6 ends
- Newly developed texturing device without lamellas:
- Improved plug cooling for higher crimp stability.
- Highly consistent and repeatable crimp values.
- Gravimetric dosing system
- Short melt pipe between extruder and spinning beam.
- Round bottom loaded self-sealing spin pack
- Reinforced floor panel of the quench cabinet which can be opened/closed pneumatically
- Maximum output 40-42 kg/h/end at 100 per cent efficiency
- Newly developed 3-ends winder:
- Traverse system with multiple wings.
- Cooler bobbins due to low friction winding.
