Being the most fundamental component of the machining process, the CNC machining center and other process components are all optimised around the goal of using the higher spindle speed productively.

In today's business environment, a company can only be competitive by optimising all its resources. So, to get the maximum efficiency is the key factor to achieve the targets. For that reason Pinter FA.NI has developed EffiSpin, a global solution for the production management, giving all the necessary tools to achieve the highest efficiency standards.

Innovative Engineers has launched an yet another state-of-the-art product for the spinning industry, which is a small step in the ever growing automation in material transportation in a textile mill.

DowCorning Corporation, a leading supplier of innovative silicone solutions for the textile industry, recently presented a paper on "Differentiate your garment using a green wash" at AATCC's Fashion Garment Washing Symposium this December. The presentation highlighted the company's eco-solution for denim finishing.

We are all familiar with the scenario - a moment of distraction and the damage is done: Salad dressing splashes onto the silk tie and it has to be sent for dry cleaning. During a flight, the coffee cup tips its contents over the fine wool suit and there is no time to change before that important business meeting.

Genencor, a division of Danisco A/S, today introduced PrimaGreen® EcoLight 1, the latest in the company’s portfolio of products for more sustainable denim bleaching. The PrimaGreen® portfolio gives textile manufacturers the tools to produce denim apparel in a variety of finishes. In addition, with PrimaGreen®, denim can be stonewashed and bleached using a single bath, requiring significantly less water and energy than the established process.

Since its foundation in 1957, based on accumulated experience and know-how in stenter technology, EHWHA Machinery Mfg Co Ltd of Korea, which is represented in India by Dipti International, has achieved a second-to-none position in manufacturing stenter product.

Ferraro of Italy, which is represented in India by the Delhi-based Dipti International offers a slitting machine that is suitable for cutting and opening of clothes. It is constructed for cutting of tubular knitted fabrics dried on roll or damp rope. Cutting of fabrics takes place along possible needle reject by self-sharpening circular blade.

The Bianco's Pin Wheel Weftstraightener TRAMATEXSP04 has been specially designed to correct any type of weft distortion on a wide range of fabrics, from the most delicate to the heaviest, except for knitted and stretch fabrics.

Dipti International is an innovative company in textile finishing machinery and its valued spares supplying agency since 1997. The team is headed by the company's Chief Executive Officer, Mr Amiya Kumar Swain and with its own excellent sales team (with two members) at northern part of India and as well as eastern part of India.

Laxmi Industrial Systems, which has installed a LAXMI-MX3 in Syria with a printing width of 2,200 mm with 10 colours and another in Estonia with a printing width of 3,250 mm, 16 colours, has more than 1,000 satisfied customers in India.

Lawer Spa, Italy, which is represented in India by the Ahmedabad-based Sagar Group of Enterprises, has developed automatic and semi-automatic chemical and dye weighing, dissolving and dispensing systems for the textile industry. More than 2000 plants and dosing systems have been installed worldwide, which have contributed in innovating the process technology of dyehouse colour kitchens, printworks and textile finishing, ensuring safe and clean working environments.

Sizing quality is critical to spun fabric quality. Weaving performance demands properly sized yarn. Yarn with low elongation, evenly applied size application, level moisture content, and low yarn hairiness produces the desired result.

Xetma Vollenweider GmbH, Germany, which is represented in India by the Ahmedabad-based Sagar Group, offers equipment & technologies for emerising & brush sueding, shearing, raising, cloth clearing and carpet shearing.

Mangal offer test system for accurate measurement for LEDs of relative spectral power distribution, chromatic coordinates, correlated color temperature, SDCM, rendering index, peak Wavelength, spectral half width, dominant wavelength, color purity, luminous flux, forward current, forward voltage, reverse leakage current, reverse breakdown voltage etc.

James H Heal has launched the Titan³ Universal Strength Tester (CRE). With the increased ability to work in tension and compression and the introduction of a wide variety of new tooling and accessories and updated software, users will find Titan³ offers a whole new suite of opportunities.

The new Allen-Bradley® Kinetix® 6200 servo drive from Rockwell Automation has advanced safety features that help manufacturers protect personnel and improve production efficiency. Leveraging the proven performance of the Kinetix 6000 family, the Kinetix 6200 drive includes features, such as safe stop, zero speed monitoring, safe direction monitoring, and safe maximum acceleration monitoring.

INA has appointed TeFoc as its distributors in India. India being one of the largest producers of textiles in the world with its spinning, weaving, knitting and garmenting facilities it is important that the company improves its technology and leadership in this field.

Rollin Castors is one of the India's leading manufacturers, suppliers & exporters of industrial castors & wheels of all varieties operating from extensive premises in east Delhi (India). The company has expanded & developed considerably since it was founded way back in late 70s.

Cleantek has been manufacturing industrial grade dry vacuum cleaners and wet & dry vacuum cleaners for light duty/heavy duty applications. These machine provides long lasting, excellent performance without any maintenance cost. The company has developed special purpose battery-operated/fuel-operated vacuum cleaner.

Pammvi has introduced the complete range of state-of-the-art of over 150 different models of motion and occupancy sensors for energy conservation from world leaders – Steinel, Germany, used for both indoor and outdoor applications.

WQSensors are the latest in smart sensor technology with direct computer interface. A six foot sensor cable with integral USB connector offers a hassle-free connection to Windows-based PCs and mobile devices. The WQSensor is powered from the USB port, and data is displayed in real-time directly on the computer screen.

TAS–Schafer is a patented manufacturer of premium quality Hydraulic Shrink Disc. The product quality is certified by EN ISO 9001: 2000 Germany. This device is to be fitted on hub which locks the shaft with the hub for further manufacturing activity. These are meant for highly stressed shaft-hub connections.